Home > company's product> Zibo Tablet > High flake alkali
High flake alkali

High flake alkali

Product Details

Highly flake caustic soda is used in wastewater treatment. In order to increase the pH value of the raw water, strengthen the coagulation and sedimentation effect, and optimize the quality of the effluent water, an alkaline regulator should be added in the water treatment process. The effect of adjusting the pH value and its influence on the effluent quality were studied. The cost of adding alkaline regulators is analyzed. The results show that using solid sodium hydroxide as an alkaline regulator has good effects and low production costs.
High flake caustic soda is also widely used in printing and dyeing industry, with good color rendering rate. Use this product instead of soda ash, even if 1/10 of the soda ash is used, it can maintain a sufficient color supply. In the process of operation, adding too much of this product will not affect the color of the fiber.
It is suitable for various reactive dyes, and has high color rendering ability and reproducibility for various reactive dyes. It is suitable for all kinds of equipment, mainly low liquor ratio and aerosol dyeing machines. It can better solve the difference between the inner and outer layers in cheese production.
Highly flake caustic is a new type of buffered solid caustic with low electrolyte content and low dissolved ionic strength. Therefore, the coloring speed is slower in the process of adding alkali, so that the level dyeing property of the dye is better. Whether it is dyeing dark or light colors, the alkali addition time is about 20 minutes, which shortens the dyeing time. The quality of dyed products is increased, and the repair rate and cost are saved.